REL1.1
Page 7 of 51
iWave Systems Technologies Pvt. Ltd.
RZ/G1C SBC Hardware User Guide
1.
INTRODUCTION
1.1
Purpose
This document is the Hardware User Guide for the RZ/G1C Single Board Computer
based on the Renesas’s RZ/G1
C
Application processor. This board is fully supported by iWave Systems Technologies Pvt. Ltd. This guide provides
detailed information on the overall design and usage of the RZ/G1C SBC from a Hardware Systems perspective.
1.2
Overview
The RZ/G1C Single Board Computer is an extension of RZ/G1C CPU. SBC is an off-the-shelf board that integrates all
the core features of a common PC. RZ/G1C SBC has a form factor of 85mm x 56mm and provides the functional
requirements for an embedded application.
1.3
List of Acronyms
The following acronyms will be used throughout this document.
Table 1: Acronyms & Abbreviations
Acronyms
Abbreviations
ARM
Advanced RISC Machine
BPP
Bits Per Pixel
BSP
Board Support Package
CAN
Controller Area Network
CMOS
Complementary Metal-Oxide Semiconductor
CPU
Central Processing Unit
CVBS
Composite Video Signal
DDR3
Double Data Rate 3
eMMC
Enhanced Multi Media Card
GB
Giga Byte
GPIO
General Purpose Input Output
HSCIF
High Speed Serial Communication Interface with FIFO
I2C
Inter-Integrated Circuit
IC
Integrated Circuit
JTAG
Joint Test Action Group
Kbps
Kilobits per second
LVDS
Low Voltage Differential Signalling
MAC
Media Access Controller
MB
Mega Byte
Mbps
Megabits per sec
MHz
Mega Hertz
MSIOF
Clock-Synchronized Serial Interface with FIFO
