REL0.1
Page 88 of 95
Kintex Ult FPGA (KU19P) SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.2
Environmental Characteristics
3.2.1
Temperature Specification
The below table provides the Environment specification of Kintex Ult FPGA (KU19P) SOM.
Table 10: Temperature Specification
Parameters
Min
Max
Operating temperature range - Industrial
1
-40°C
85°C
Operating temperature range - Extended
1
0°C
85°C
¹ iWave guarantees the component selection for the given operating temperature. The operating temperature at the
system level will be affected by the various system components like carrier board and its components, system enclosure,
air circulation in the system, system power supply etc. Based on the system design, specific heat dissipating approach
might be required from system to system. It is recommended to do the necessary system level thermal simulation and
find necessary thermal solution in the system before using this board in the end application.
3.2.2
RoHS2 Compliance
iWave’s
Kintex Ult FPGA (KU19P) SOM is designed by using RoHS2 compliant components and manufactured
on lead free production process.
3.2.3
Electrostatic Discharge
iWave’s
Kintex Ult FPGA (KU19P) SOM is sensitive to electro static discharge and so high voltages caused by
static electricity could damage some of the devices on board. It is packed with necessary protection while shipping.
Do not open or use the SOM except at an electrostatic free workstation.
