Functions of the crown
X
Normal position
(screwed in)
0
Winding position
1
Date and day setting
2
Time setting
Normal position
This watch has a screw-in crown. Screwing the crown in
to its normal position (X) prevents the inadvertent adjust-
ment of the time or date and also acts as a double seal to
prevent water from seeping into the case. To release the
crown, unscrew it by turning it to the left, where it auto-
matically assumes position 0, the winding position. By
depressing the crown in position X and turning it to the
right at the same time, it is screwed down firmly again
and secured.
X
0
1
2
