39
3.5.15 Set SDRAM Timing By SPD
When Enabled, the system BIOS will reference data of DIMM module EEPROM.
Options
Enabled (*)
Disabled
3.6 POWER MANEGEMENT SETUP
This setup page specifies power management features.
There are several modes used to save computer’s energy:
Doze Mode
The CPU clock will run at slower speed, and all other devices still
operate at full speed
Standby Mode
The CPU clock will run at slower speed, and the fixed disk drive will
be power off, and the video will be power off, and all other devices
still operate at full speed
Suspend Mode
All devices except the CPU will be shut off
Each power saving mode has a respective timer. The value of the timer can be assigned or reloaded
and it will count down to zero. When the timer equals to zero, the system will be forced into the
related power saving mode. If any predefined signal or event is detected during the timer counting
period, the timer will be reloaded automatically.
3.6.1 ACPI Function
This item allows you to enable/disable the Advanced Configuration and Power Management
(ACPI).
Options
Enabled(*)
Disabled
3.6.2 Power Management
Options
Description
Disable
The computer always runs at full speed. No power is saved
Min Saving
When idled for one hour, the system will enter suspend mode
Max Saving
When idled for fifteen minutes, the system will enter suspend mode
User Define (*)
User can specify the timer value of each power saving mode
