OCEANO RT2500S/RT5000S Series – User Guide
System:
RT8x1
Preventive Maintenance
Sub-system
: RT8x1
Reference:
PM01
Page:
1/1
Subject: Opening the Transponder
Frequency:
for batteries replacement
Duration:
10 minutes
Size 10 Allen key
The acoustic transponder must be opened in a dry and clean area.
Please refer to the appropriate hook User Manual.
If the user wants to have access to the acoustic transponder's electronic assemblies, it
must be partially dismounted as follows:
T
HE SEAL HOUSINGS ON THE END CAPS AND THE TUBE ARE SURFACES THAT MUST BE PROTECTED
FROM ANY SHOCK AND MUST REMAIN FREE FROM SCRATCHES
.
T
HEY ALSO REQUIRE PROTECTION
DURING MAINTENANCE OPERATIONS
.
Step
Action
1.
Lay the device down horizontally.
2.
Refer to the User Manuel of the release hook mounted on the RT8x1 transponder to get
access to the central closing nut fitted on the lower end cap.
3.
With the size 10 Allen key, loosen the central closure nut 9101638B on the lower end
cap, one of the two end caps must move away from the tube.
4.
Pull out the upper end cap (transducer side) with care to have access to the transducer
connector of the electronic PCB.
5.
Disconnect connector.
6.
Remove upper end cap.
7.
Pull the internal structure, integral with the lower end cap, featuring the electronic
assemblies out of the tube housing.
8.
End of procedure
Equipment
Precaution
Preliminary
Steps
Procedure
MU–RT8x1–AN–001 Ed. M – September 2013
35
Summary of Contents for OCEANO RT2500S Series
Page 1: ...OCEANO RT2500S RT5000S Series LF Transponders User Guide...
Page 2: ......
Page 10: ......
