Custom Manuals
Provided by www.ixium.co.uk
3
Overview & Basic Setup
Figure 1
Battery and Charging
Supplied with the glasses is a USB cable which enables you to charge the internal battery. This can
be done via a computer or a USB mains charger. Whilst on charge, the LED indicator will flash red.
Inserting the Memory Card
For the glasses to record any footage you must insert a Micro SD card; you can use any Micro SD
card from 4GB up to a maximum of 32GB. If you need a Micro SD card then take a look here:
www.wecostless.co.uk > electronics > memory cards
To insert a memory card into the device, find the card slot on the side of the arm. Insert the memory
card with the contacts facing down and push until it clicks into place.
Figure 2
MFB
(multifunction
button)
LED Indicator
