Custom Manuals
Provided by www.ixium.co.uk
4
Reading the Memory Card
Connect the glasses via the included USB cable to a USB port on your desktop or laptop computer.
You may see a message in the system tray about “Installing Device Drivers”. You will then see an
“Autoplay” window open which will allow you to access the inserted memory card. If
the autoplay
window does not open it may be due to your settings. You can still access the memory card by going
to “My Computer” and then double clicking the appropriate removable device.
If you are unsure which device is your card then do the following.
Open the “My Computer” window
and see what it there, plug in the glasses and you will see the removable device appear in the
window. Please allow up to 30 seconds for the device to appear.
Operation Instructions
Turn the Glasses On and Off
Press
and hold
MFB for 3 seconds and let go. At first the LEDs will show both blue and red for
around 2 seconds before turning solid red and this is Standby mode.
When the glasses are in standby mode, press and hold MFB for 5 seconds. The LED goes out and the
glasses are now off.
Recording a Video
When the glasses are in standby mode, press
and hold
MFB for 3-4 seconds and let go. The LED will
flash 3 times and then go out
–
the glasses are now recording a video. Press the button again to stop
recording. The LED will turn red
–
the glasses are now back in standby mode.
Taking a Picture
When the glasses are in standby mode, quickly press the MFB. The LED will go blue for a moment
and then come back on red
–
this indicates the glasses have taken a picture.
