Base ► Monitor ►Trend
Name
Description
Chlorine Residual Trend
Trendline of monitored residual level
Residual (ppm)
Current value of monitored residual
Target (ppm)
Desired residual level (Automated Management)
Base ► Monitor ► Tanks
Name
Description
Tank Status Information
Reads current level of Monitored Tank and Chemical Bulk Storage. Levels displayed must be above
configured limit, corresponding to LOW LVL pilot light.
Bulk Clear
System monitors Chemical Bulk Storage for unaccounted usage or changes in volume. When tanks are
filled, emptied, or the volume is otherwise changed must clear the current tracking information by pressing
BULK CLEAR.
Base ► Monitor ► Real-Time
Name
Description
Motor Conditions
Quick view of the current status of the Mixer, Sample Pump, and Return Pump. Amperages here must be
within configured limits, corresponding to the STATUS pilot light of each. CMD signifies if the respective
pump is commanded to run.
System Conditions
The system is continuously monitoring a number of functions, the majority of which are represented by pilot
lights under system conditions.
Overview
Users with Monitor permissions will have access to the following screens and menus. The Monitor menus are available
to quickly view system status, historical actions, and diagnostic information. Monitor is the lowest access level, and has
limited operational and administrative capabilities.
Base ► Monitor ►Dosing
Name
Description
Last Dose Information
Provides relevant information on the last dose made by the system including: Date and Time, Chemical
Type, Volume(s), and the Mode in which the command was made.
Daily Volumes
Current total volume(s) of respective chemical(s) dosed since 0:00 of the current day. Volume limit pilot light
indicating current daily volume in excess of configured limit.
Base ► Monitor ► Alarms
Name
Description
Alarm Log
Log providing diagnostic information for recognized system warnings and faults. Warnings are denoted by
a (+) and no reset is required. Faults are denoted by (!) and do require a reset (Base > Operate).
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | watercare@ixom.com
Menu
Monitor
Monitor Menu
System Status and Diagnostic Information
10349_20220119
ControlManual_ResidualHQ_10380_20220809a - 7
