Remote Control System TT801 – User Guide
MU-TT801-AN rev.6 September 2009
6
Each of the commands defines above have a code number to enter in the TT801. These
code numbers can be found in the provided build sheet of your target (see Appendix C).
OCEANO AR/RT/ET800, AR/RT900 and AR701 series are always triggered using a dual
word command (ARM and EXECUTION sequence).
AR600 series are always triggered using a single command word (direct command).
RT600 series are usually triggered using a single command word. However some
commands can be individually to a dual word command (WINDOW/ARM and
EXECUTION sequence). The factory set dual word commands are identified by the “(W)”
note on the build sheet.
In the same way, each target has its own interrogation frequencies, type of recurrence,
which you have to enter in your TT801. You can find this information in the provided build
sheet of your target (see Appendix C).
Depending on the target,
•
The Remote control TT801 receives acknowledgement (CAF for the AR/RT/ET800,
AR/RT900 series or FT0 for AR/RT600 series) from the target or not.
•
The Remote control TT801 receives some verticality, battery power and/or distance
information.
•
The Remote control TT801 is also able to detect the acoustic transmission of free
running Pinger and to display the Pinger transmission rate.
Reception
Summary of Contents for TT801
Page 1: ...TT801 Remote Control System User Guide...
Page 2: ......
