Copyright IXXAT Automation GmbH
CAN@net II - Manual, V1.4
Appendix
17
5
Appendix
5.1
Technical specifications
Ethernet interface:
10/100 MBit, twisted pair
Microcontroller:
Freescale MCF5235, 150 MHz
RAM / Flash:
8 MByte SDRAM / 4 MByte
CAN controller:
internal and 1x Philips SJA1000T
CAN transceiver:
Texas Instruments SN65HVD251P
Max. number of CAN bus nodes: 120
CAN bus termination resistor:
none
CAN propagation delay:
with galvanic isolation typically 32 ns
CAN baudrates:
10 kBaud – 1 MBaud
Max. CAN message rate
21000 messages/s (continuous)
(with VCI, receive direction):
21000 messages /s (burst)
Max. CAN- message rate
7200 messages /s (continuous)
(with VCI, transmit direction):
Power supply:
+9 V to +32 V DC
Power consumption (normal):
typically 110 mA (at 24 V input voltage)
maximum 250 mA (at 24 V input voltage)
Housing material:
Polyamide
Dimensions (L x B x H) in mm:
114,5 x 99 x 22,5
Weight:
approx. 300 g
Protection class:
IP30
Operating temperature range: -20 °C - +70 °C
Storage temperature range:
-40 °C - +85 °C
Relative humidity:
10 - 95 %, non-condensing
Galvanic isolation:
500 V AC for 1 min
Device security:
CSA/UL 60950-00 Class 3862 10, 3862 90
Environmental directive:
RoHS, WEEE, directive (2002/95/EC)
Summary of Contents for CAN@net II
Page 4: ......
