manualshive.com logo in svg

IXXAT USB-to-CAN V2, Hardware Manual

The IXXAT USB-to-CAN V2 is a versatile hardware tool that allows for seamless integration of CAN networks into USB-based systems. Users can access the free Hardware Manual for the product by downloading it from 88.208.23.73:8080 to get detailed instructions on how to effectively utilize this essential device.

Share
Download
background image

Notes 

 

Copyright HMS Technology  
Center Ravensburg GmbH 

14

 

USB-to-CAN

V2

-Plugin Manual, V1.2 

 

5  Notes 

5.1 

CAN Busabschluss 

There is no bus termination resistor for the CAN bus in the CAN interface inte-
grated. IXXAT offers a bus termination resistor as a feed through connector as 
accessory (order number 1.04.0075.03000) 

 

Figure 5-1: CAN bus termination resistor 1.04.0075.03000 

 

 

5.2 

LIN interface 

A LIN interface is only available on model 1.01.0288.22043. 

 

The LIN interface can be configured as LIN Master according to LIN specifica-
tion. If the CAN interface is used as a LIN-Master, a voltage of 12 V DC (volt-
age  range  8  -  18  V  DC)  has  to  be  connected  to  pin  VBAT

LIN

,  see  Table  3-2.  

Power consumption is limited by a 1 kΩ resistor. 
 

Summary of Contents for USB-to-CAN V2


















Reviews:

No comments

Related manuals for USB-to-CAN V2

Brands by name

Popular brands

Load more brands