IXXAT USB-to-CAN V2, Hardware Manual

Introduction 

Copyright HMS Technology  
Center Ravensburg GmbH 

5

USB-to-CAN

V2

-Plugin Manual, V1.2 

1  Introduction 

By  purchasing  the  IXXAT  USB-to-CAN

V2

  Plugin  interface,  you  decided  for  a 

high-quality  electronic  component  developed  and  manufactured  according  to 
the latest technological standards. 

In the further description these interfaces are referred as CAN interface. 
 

The features of the CAN interfaces are described below. 
 

Common features 

 
All CAN interfaces have the following features: 



USB  2.0 Hi-Speed (480MBit/s) 



Ceonnection using single row female header (Field bus- and USB) 



Same dimensions and fastening possibilities 

Type dependend features 

Depending  on the used  CAN interface different  field  busses  and features are 
supported.  
 

Order number 

Features 

1.01.0288.11003 



one CAN-High-Speed channel according ISO11898-2 

1.01.0288.12003 



one CAN-High-Speed channel according ISO11898-2 



galvanic isolated 

1.01.0288.22003 



two CAN-High-Speed channels according ISO11898-2 



galvanic  isolated  (both  CAN  channels  on  same  poten-
tial) 

1.01.0288.22043 



two CAN-High-Speed channels according ISO11898-2, 
one of these channels is software switchable to  ISO 
11898-3 (CAN low speed/Fault tolerant) 



one LIN-Interface V1.3 and V2.1, Master/Slave-Mode 
switchable via software.   

Please note instructions under chapter 5.2. 



galvanic isolated (both CAN channels and LIN on same 
potential) 

Table 1-1