125
125
125
125
DEF START TIME
Sets the default start time for projects created using
NEW PROJECT
. The factory default is 00:59:55:00.
DEF UNDO LEVEL
Sets the default number of undo levels for each project created using the
NEW PROJECT
function. The
factory default is 10 levels of
UNDO
.
DEF WAVE NS FLR
This dialog sets the signal level threshold for waveform drawing for projects created using
NEW
PROJECT
. The factory default is -80.0 dB. Noise and other signals below the noise floor setting will not
be drawn. The threshold value can be modified in 5-decibel increments between -90.0 and -60.0.
NETWORK SETUP
For detailed information on network preferences please refer to S
YSTEM
S
ETUP
: C
ONFIGURATION
:
N
ETWORKING
.
INTERFACE PREFS
HOST NAME
Enter the host name for your RADAR
24.
DHCP ENABLE
Enable or disable Dynamic Host Configuration Protocol.
LOCAL IP ADDRESS (DHCP DISABLED)
Enter the IP address of your RADAR
24.
SUBNET MASK (DHCP DISABLED)
Enter the subnet mask if required.
GATEWAY (DHCP DISABLED)
Enter the address of your Internet router.
DOMAIN NAME (DHCP DISABLED)
Enter a domain name.
PRIMARY DNS (DHCP DISABLED)
Enter the address of a primary domain name server.
SECONDARY DNS (DHCP DISABLED)
Enter the address of a secondary domain name server.
