12
6. MACHINE START-UP
6.1 TURNING ON THE MACHINE
Turn on the machine by placing the main switch in position “I” or “ON” (fig. 13, tab.
1).
The machine heats the steam boiler and the coffee boiler only after
they have been filled.
NOTE: The machine is set by default to be used with the reservoir
function.
WARNING: when the machine is first turned on, it is necessary to wait
about 14-15 minutes to reach optimal working temperatures.
WARNING: when the machine is first turned on, make sure to fill the
reservoir up to the maximum mark.
WARNING: when the machine is first turned on, the boilers will begin to
fill with water.
6.2 FIRST USE WITH RESERVOIR CONNECTION
Fill the reservoir to the maximum mark to allow water to fill the boilers.
Repeat the procedure to refill the container (par. 7.1).
