16
heating pad is switched on.
Please note that, for safety reasons, the heating pad must not be used after a fault and must
be returned to the service address indicated.
Operation
NOTE: the heating pad may smell of plastic the first time you use it, but this will disappear
after a short period of time.
Switching On/Off – Selecting the Temperature
To use the device, first connect the control unit 1 to the heating pad by plugging the plug-in
connector 2 and the plug for the control unit, 3 together (see Fig. B).
Switching on:
Set the control unit 1 to to a temperature from 1 - 6 to switch on the heating pad.
Switching off:
Set Level 0 on the control 1 to switch the heating pad off. If you are going to use the
device for a number of hours, set it to the middle temperature (setting 3).
Selecting the temperature:
Set the highest temperature level (Level 6) shortly before use. This heats the pad faster.
Temperature levels
Set the required temperature level on the control 1 (see Fig. A).
Setting 0: off
Settings 1+2: minimum heat
Settings 3+4: medium heat
Settings 5+6: maximum heat
Care and Cleaning
Use the heating pad with the textile cover to prevent soiling or damage to the device
(particularly if using essential oils and creams).
WARNING! RISK TO LIFE FROM ELECTRIC SHOCK.
Before cleaning the heating pad,
always pull the mains plug out of the mains socket and separate the plug-in connector 2 from
the plug for the control unit 3 (see Fig. B).
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control 1 to the heating pad until the
plug-in connector 2 and the heating pad are completely dry. Otherwise, there is risk of electric
shock.
DANGER OF ELECTRIC SHOCK! DANGER OF MATERIAL
Summary of Contents for 02003
Page 2: ...1 Περιεχόμενα Contents GR Σελίδες 2 11 EN Pages 12 18 ...
Page 20: ...19 ...