17
Parts of the Appliance
Installation Instructions
1. Unpack the package, take out the product and confirm whether it is kept well.
2.Invert the product to keep the bottom side up. (Put soft cushion on the floor first to avoid
scratch on the product surface.)
3.Take out the base plate. Connect the two parts until you hear the click sound. Put the
electrical wire through the wire hole. Put the base plate to the pedestal and fix the base plate
and heater together with bolts.
4.Straighten the wires to the wire groove on the side of base plate. 5.After finishing the above
4 steps, invert the heater back for use.
Note:
When put on the base, please make sure that the tip-over switch is at the right position.
Products of some certain types have no base plate, so there is no need for base plate
installation.
Power setting switch
Base
Floor heater body
Oscillation switch