13
ATTENT ION
: If the safety interlock handle is not properly locked, with
the lid, the pulp container and the filter basket in their correct position,
the juice extractor will not operate.
• When assembling or disassembling the juicer, press the upper part of
the feeder, located on the cover, with your hand and then force the
safety handle to slide in or out of the cover slots.
• To remove the filter basket from the appliance, first unlock the safety
handle and remove the cover and the pulp container from the main
body of the appliance. Then rotate the filter basket approximately by
30° clockwise or counter clock wise and lift it up to remove it from the
main body of the appliance.
• Before assembling the juicer, please refer to section “The parts of the
appliance”.
• Before use, place the appliance on a stable, even and dry surface
and operate it according to these instructions.
• Before juicing, make sure that you secure the filter basket firmly into
place. Then place the pulp container and the cover on the main body
and secure the safety handle. Turn on the appliance.
• During the first use, a particular odor may derive from the motor. This
is normal and it will stop after a while.
• During juicing, make sure that there is not too much juice and residue
in the juice collector and the pulp container respectively. If these two
accessories fill up, then turn off the appliance, empty their content and
reassemble the juice extractor. Then you may start juicing again.
Attention
: To protect against the risk of any possible harm or damage,
do not insert your fingers or any other object in the feeder tube.
• All accessories of the appliance are strictly prohibited to be placed
into high temperature sterilization cabinet for disinfection purposes.
Attention
: Do not operate this appliance empty and do not over load
it during use.
• After use, always turn the power –selector knob to “0” position and
unplug the power cord from the mains supply before you pour out the
juice from the appliance.
• After use, turn the power –selector knob to “0” position to deactivate
the appliance and unplug the power cord from the mains supply.
• Ensure that the motor of the appliance has stopped operating
completely and remove the power cord from the supply mains before
you unlock the safety interlock handle and remove the lid.
• Always turn the power – speed knob to “0” position to deactivate the
appliance before plugging or unplugging the power cord to the mains
outlet.
