izzy spicy red 310L, Instruction Manual

16

1. Pushing bar
2. Transparent cover
3. Juicing net
4. Juice Collector
5. Handle
6. Pulp container
7. Main body
8. Juicer jug

Before the First Use

• Before you connect the appliance on the supply mains, check that the voltage indicated on 
the data plate of the appliance corresponds to that of the voltage mains in your home. If this is 
not the case, do not use the appliance and contact one of the authorized BENRUBI Service 
Centres. 
• Remove all packaging materials from the appliance. 

To disassemble the juice extractor, please follow the steps as indicated below:

• Place the appliance on a stable, dry and horizontal surface.
• Release the safety interlock handle by lifting it over the lid and pulling it towards the
spout. Release the safety interlock handle below the spout.
• Remove the pusher and the lid from the appliance.
• Then, remove the stainless steel filter, by rotating it approximately by 30° clockwise or 
counter clock wise and lift it up to remove it from the main body of the appliance.
• Remove the juice collector and the pulp container from the main body of the appliance.

WARNING

: Special attention should be paid when handling the filter to avoid any possible 

injuries.
• Remove the juice container and wash it thoroughly with warm soapy water.

NOTE

: Wash all the removable parts with warm soapy water.

• Use a soft damp cloth to clean the main body (motor) of the appliance.

ATTENTION 

: Do not immerse the main body (motor) in water or any other liquid.

ATTENTION 

: Do not put the filter in the dish washer for washing since it would damage the 

stainless steel thin filter net.

To assemble the appliance, please follow the steps as below:

• Adjust the pulp container to the main body of the appliance.
• Place the juice collector to the main body, so that the two knobs are securely fitted in the pulp
container.
• Place the stainless steel filter on the juice collector.

NOTE

: Make sure that the filter is placed correctly in to place.

• Place the lid on the main body and insert the pusher in the feeding tube.
• Lift the safety interlock handle over the lid and push lightly until you hear the sound indicating
that the handle is securely fitted in the two slots located on top of the lid.
• Before turning on the appliance, make sure that the lid is correctly fitted in its place and
that the safety interlock handle is securely locked. Never unlock the safety interlock handle 
while the appliance operates.