background image

 

23

LIMITED LIFE WARRANTY 

 

J.A.  ROBY  INC.

  warrants  for  life  (following  conditions  written  in  the  present  manual)  its  high  quality 

appliances  against  all  manufacturing  defectiveness.  This  warranty  is  only  valid  for  the  first  buyer  of  the 
appliance with a purchase proof and the serial number of the appliance. 
 
This  warranty  is  valid  only  for  a  normal  residential  utilisation.  All  damages  caused  by  a  misuse,  a  wrong 
installation, a wrong maintenance, a negligence or an accident during transportation are not covered by this 
warranty. 
 
This warranty does not cover scratches, corrosion or discoloration caused by excessive heat, abrasives and 
chemical  cleaners.  All  defectiveness  or  damage  caused  by  the  use  of  parts  other  than  the  manufacturer's 
original parts will automatically cancel this warranty. 
 
This  warranty  is  subject  to  the  following  exceptions:  glass,  paint,  firebricks,  door's  plating,  decorations, 
ceramic cord and installation. The fans and electrical parts are covered by a 90 days warranty (from invoice 
date). 
 
The 

1

st

  year

,  J.A.  Roby  Inc.  engages  to  undertake  the  necessary  repairs  without  additional  charges.  The 

appliance must be sent to our manufacture, located at 490, rue de l'Argon, Québec (Québec) G2N 2C9. The 
owner must prepay transportation charges. 

J.A. Roby inc. will NOT accept any transportation charges.

 

 

The 2

nd

 year

, J.A. ROBY Inc. assume 

50%

 of repairs according to the above conditions. 

The 3

rd

 year

, J.A. ROBY Inc. assume 

45%

 of repairs according to the above conditions. 

The 4

th

 year

, J.A.ROBY Inc. assume 

40%

 of repairs according to the above conditions. 

Subsequent years

, J.A.ROBY Inc. assume 

30%

 of repairs according to the above conditions. 

 

You MUST return this card in order to register your appliance for the Warranty. 

 

If your appliance has defectiveness, contact immediately your J.A. Roby distributor whom will guide you. 

 

Before sending a product or a part at our manufacture, you must receive an authorization number from your 
sale  representative  or  your  J.A.  Roby  distributor.  All  merchandise  sent  without  authorization  will  not  be 
accepted and will be returned to the shipper. 

 

 

WARRANTY CARD 

 

APPLIANCE MODEL:   _________________________________________________________ 

DATE OF PURCHASE:  _________________________________________________________ 

STORE:  ______________________________________________________________________ 

INSTALLATION DATE:  _____________________  SERIAL #:  ________________________ 

NAME:   ______________________________________________________________________ 

ADDRESS:   ___________________________________________________________________ 

PROVINCE:   ___________________________POSTAL CODE:  ________________________ 

INSTALLED BY:   ______________________________________________________________ 

BUYER'S SIGNATURE:

   ______________________________________________________________ 

Summary of Contents for ATF727
























Reviews: