November 5, 2015
22
ATTENTION:
DO NOT CHARGE THE STOVE OVER THE HEIGHT OF
THE BRICKS.
DO NOT BUILD A FIRE TOO CLOSE TO THE DOOR
GLASS.
YOUR APPLIANCE IS CONCEIVED FOR BURNING CORD
WOOD. ANY OTHER KIND OF WOOD IS NOT
RECOMMENDED.
19) Close the door slightly and let the wood burn.
20) Once the fire becomes stable, close and lock the door.
21) Adjust the air admission handle to desired setting.
NEVER LEAVE THE STOVE UNATTENDED WHEN THE
DOOR IS SIGHTLY OPEN. ALWAYS CLOSE THE DOOR
AFTER ADDING A LOAD.
NEVER USE ANY INFLAMABLE LIQUID TO REVIVE THE
FIRE.
Fans Controls
On the Snap Disc box, an automatic fan controller, there is a
switch to turn it on and off.
When it’s on, the fan goes off at the temperature of ventilation
box getting higher than 120 Fahrenheit (49 degree Celsius).
The fan doesn’t work when the switch is off.
If your stove does not have a switch, the fan works
automatically as the switch is on.
NEVER ROUTE THE ELECTRIC WIRE OF FANS IN FRONT
OR UNDER APPLIANCE.
Wood storage
The cordwood must be stored in a dry place, away from rain
and snow.
It should not be stored under the stove or too close to it.
If any wood is stored next to the stove, you must respect the
minimum clearances to avoid self-ignition.
10 inches (25.4 cm) rear
20 inches (50.8 cm) side
48 inches (122 cm) loading door
