November 5, 2015
8
Assembly before installation
The stove leg and the warming oven top might not be assembled
in the factory, in order to save space for transportation and
storage. You must therefore assemble these parts before
installing the cook stove.
DO NOT USE THE APPLIANCE WITHOUT INSTALLING THE
LEGS.
Installing legs
1) Take out legs and bricks from the combustion chamber.
2) Unscrew the stove from the skids.
3) Lay the stove on its back carefully not to damage the
paint.
4) Loosen the nut (#2) without removing it completely.
5) Install the legs (#1) as illustrated below.
Attention: Make sure the legs are in place, correctly
positioned and in contact with the bottom of the stove.
The washer (#3) should also be in place.
Fan and Snap disc box installation
1) Install the two fans at the bottom of vent box as
illustrated. Please note that the cords must be placed
as shown.
2) Screw the snap disc box into the holes made for this
purpose at the back near the vent box.
WARNING: THE POWER CORD MUST NOT BE
PLACED UNDER OR IN FRONT OF THE APPLIANCE.
Fan
Grid
Screw
Snap disc box
Screw
Star washer
