PR_I020/2023-08-11-EN
Revision: 5
10
Firebricks installation
Bottom firebricks installation
1) Put 4 bricks «A» in the bottom as shown in the picture
below.
2) After, insert 5 bricks «A» in front of the 4 bricks previously
placed.
3) Insert 2 brick «A» and 1 «H».
4) Insert brick «A» on the right and «R» on the left to finish
the installation at the bottom.
Back firebricks installation
5) Put 4 bricks «A» and «C» against the back wall.
6) Put the 3 brick screws in the hole for this purpose and
tighten them loosely so that split washers can be insert
easily.
7) Add 4 bricks «S» horizontally on the 4 bricks «A» previously
placed.
8) To finish, put the split washers and tighten the screws.
Summary of Contents for ULTIMATE TOR 2015
Page 4: ...PR_I020 2023 08 11 EN Revision 5 4 Rating plate...
Page 5: ...PR_I020 2023 08 11 EN Revision 5 5 Appliance Dimension...
Page 13: ...PR_I020 2023 08 11 EN Revision 5 13 Firebox configuration and part list...
Page 28: ...PR_I020 2023 08 11 EN Revision 5 28 Annex 1 Door assembly Square Door Arc Door...