13
DOOR ADJUSTMENT
In order for your stove to operate properly, the door should be adjusted using the small
wrench tool to provide an air tight fit:
To adjust: Turn clockwise until the door is air tight.
LIGHTING
Now that you have completed the installation of the appliance according to the
recommendations, you are ready for the lighting!
1. Before lighting, be sure that the chimney is warm enough by twisting together a
few sheets of newspaper in a torch. Light up the paper torch. and hold it as close
as possible to the pipe inside the chamber to warm up the chimney.
2. Place papers and kindling in the appliance.
3. When the fire is well lit, gradually add bigger wood logs until an ember bed is
formed.
4. You can then control combustion by closing or opening the air intakes (a rod
pulled down indicates a closed air intake). The wood will burn more quickly if the
air intakes are opened to the maximum and more slowly if they are only slightly
open.
Do not charge the appliance beyond the bricks
.
Summary of Contents for ULTIMATE
Page 18: ...18 Figure 1 0...
Page 19: ...19...
