EN
83
h)
Do not let familiarity gained from frequent
use of tools allow you to become compla-
cent and ignore tool safety principles.
A careless action can cause severe injury
within a fraction of a second.
4 POWER TOOL USE AND CARE
a)
Do not force the power tool. Use the cor-
rect power tool for your application.
The
correct power tool will do the job better and
safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does
not turn it on and off.
Any power tool that
cannot be controlled with the switch is dan-
gerous and must be repaired.
c)
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If dam-
aged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
f)
Keep cutting tools sharp and clean.
Proper-
ly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g)
Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
Use
of the power tool for operations different from
those intended could result in a hazardous
situation.
h)
Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in un-
expected situations.
5 SERVICE
a)
Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts.
This will ensure that the
safety of the power tool is maintained.
MACHINE SPECIFIC SAFETY WARNINGS FOR
ROTARY HAMMERS
a)
Wear ear protectors.
Exposure to noise can
cause hearing loss.
b)
Use auxiliary handle(s), if supplied with the
tool.
Loss of control can cause personal in-
jury.
c)
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
Cutting ac-
cessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
d)
Use a metal detector to determine if there
are gas or water pipes hidden in the work
area or call the local utility company for
assistance before beginning the opera-
tion.
Striking or cutting into a gas line will re-
sult in explosion. Water entering an electrical
device may cause electrocution.
e)
Position the cord clear of rotating bit. Do
not wrap the cord around your arm or
wrist.
If cord becomes entangled with the
spinning bit it could entrap you causing seri-
ous personal injury.
f)
Position yourself to avoid being caught
between the tool or side handle and walls
or posts.
Should the bit become bound or
jammed in the work, the reaction torque of the
tool could crush your hand or leg.
g)
Do not strike the bit with a hand-held ham-
mer or sledge hammer when attempting to
dislodge a bound or jammed bit.
Fragments
of metal from the bit could dislodge and strike
you or bystanders.
h)
Never place the tool down until the bit or
accessory has come to a complete stop.
Do not use dull or damaged bits and acces-
sories.
Dull or damaged bits have a greater
tendency to bind in the workpiece.
Summary of Contents for JBH40MV SDS-Max
