These operating instructions are a part of
the product. Always keep the instructions
on site.
The operating instructions are to be
read carefully and in their entirety before
handling any product. Read the safety
precautions in order to avoid injury. Im-
proper use of the product can lead to
injury.
Please also note the safety signs on the
product. In addition, all local accident
prevention regulations and general safety
regulations also apply.
Illustrations in these operating instruc-
tions are intended for the basic under-
standing of the product and may deviate
from the actual design.
You can find additional representations
and tightening torques of screw connec-
tions in the spare parts list.
Limitation of liability
All information and instructions in these instruc-
tions were compiled in accordance with the appli-
cable standards and regulations, current techno-
logical standards as well as many years of experi-
ence.
J.D. Neuhaus GmbH & Co. KG assumes no liabil-
ity for damage due to:
•
Non-observance of the instructions
•
Inappropriate use
•
Use by untrained personnel
•
Unauthorised conversions
•
Technical changes
•
Use of unauthorised spare parts
Copyright protection
All rights reserved by the manufacturer. Neither
the operating instructions as a whole nor individual
sections may be reproduced, distributed or pro-
cessed using electronic systems in any form with-
out written permission from J.D. Neuhaus GmbH &
Co. KG. All of the brands mentioned in these oper-
ating instructions are the property of their respec-
tive manufacturers and are hereby acknowledged.
Contact data
If you have questions about handling your product
that are not answered in these operating instruc-
tions, please contact
J.D. Neuhaus GmbH & Co. KG
Windenstraße 2-4
D-58455 Witten-Heven
Tel49 02302 / 208-0
Fax +49 02302 / 208-286
www.jdngroup.com
e-mail: info@jdngroup.com
Validity of the operating instructions
These product-specific operating instructions (doc.
no. VA049318-10-OM-EN-0319-64-2), edition
03/19, apply exclusively for the product
PROFI 25
TI
with the serial number 3101649-3101650 .
Subject to changes!
Doc.-No.: VA049318-10-OM-EN-0319-64-2
Page
3
of 64
