M
AINTENANCE
8.4. Spare parts
Only use
original JDN spare parts
. J.D. Neuhaus
GmbH & Co. KG accepts no liability for the use of
non-original components and / or modifications by
unauthorised persons.
8.5. Cleaning and care
DANGER
Danger of explosion
Electrostatic charging may occur at the plastic
surfaces due to mechanical friction, potentially
leading to brushing discharges that can ignite
gases and air mixtures.
I
Only clean the surfaces with a damp cloth
(cleaning cloth with water).
If your product
PROFI 3 TI
is often used at differ-
ent locations, particularly in dirty and damp envi-
ronments,
I
clean coarse dirt from your product,
I
protect your product from corrosion.
8.6. Lubricate and grease
8.6.1. Operating materials
CAUTION
Danger of skin irritation
Oils and greases may cause skin irritation.
I
Wear protective gloves
NOTICE
Do not mix synthetic oils or greases with mineral
oils or greases, as the properties may deterio-
rate. Also never mix different types of lubricating
grease within the synthetic or mineral lubricant
groups. When operating with oilers, synthetic
lubricants may never be used. Alcohols are not
permitted as de-icing agents.
The following operating materials and lubricants
are intended for normal environmental influences.
In the event of environmental influences that pro-
mote wear, please contact J.D. Neuhaus to obtain
appropriate information.
Page
44
of 60
Doc.-No.: VA053957-40-OM-EN-0720-60-2
