M
AINTENANCE
8.17. Check the hook, shackle and
eyelets
Check load and support hook
If the dimension
x
,
y
or
h
of the load hook (support hook) is outside
of the limit value, the hook must be replaced.
Figure 17: Check dimensions of load hook (sup-
port hook)
Dimension
x
max
Dimension
y
min
Dimension
h
min
60,9 mm
42,0 mm
35,5 mm
Checking axial clearance
If the axial clear-
ance of the installed load hook or clevis exceeds
the maximum clearance specified, the worn parts
must be replaced.
Figure 18: Permissible axial clearance
Permissible
maximum
dimension of the
axial clearance
z
2,5 mm
Page
52
of 60
Doc.-No.: VA053957-40-OM-EN-0720-60-2
