J Plus, Inc
J Plus Proprietary and Confidential
23/88
5
Initial Connection
5.1
Cable Connection
Connect a UTP cable from Control PC to local MGMT Port in JLT622P and set the static IP address in the PC to
10.0.0.100 as shown in Figure 9or if you have a router you can configure network as described in Figure 10and
connect the UTP cable from WAN port to the router. You can have access to JLT622P through router from Control
PC as well using the WAN IP if the router is configured accordingly.
Figure 9: JLT622P Direct Connection for Management
Figure 10: JLT622P Connection for Management via Network
