J Plus, Inc
J Plus Proprietary and Confidential
37/88
7.2.1.7
WAN Port
From the tree menu, select WAN port to move onto Speed, Duplex mode, Auto Negotiation setting page as shown
in Figure 24. After changing Wan Ethernet port and click Apply, the new configuration must be saved.
Figure 24: WAN Port Setup Menu
7.2.1.8
Statistics Report
Statistic Report should be configured to transfer the statistic of JLT622P to statistic management server (e.g.
HeMS server).
From the tree menu, select Statistics Report to move onto the Mode, IP address, User ID, Password page as
shown in Figure 25.
After changing the Statistics Report and click Apply, the new configuration must be saved.
Figure 25: Statistics Report setup Menu
