J.Sikora
–
Initial
and
Initial MAX
Turntable Manual
21
© 2021 Notable Audio Products | www.notableaudio.com
6.
Oil the Bearing and Spindle (Both
Initial
and
Initial MAX
)
In this step, you will place the main Bearing and apply the J.Sikora Oil the Bearing and Spindle.
6.1.
Prepare the Oil
Your turntable ships with one jar of
J.Sikora Bearing Oil and a pack of
Brushes and Cleaning Cloths.
Vigorously stir the oil in the jar until it
has a uniform consistency. It should be
fairly thick, and there should be no
lumps at the bottom jar.
Note how the liquid clings to the Brush.
Bearing Oil, Brushes, and Cloths
Make Sure Oil is Well Mixed and Thick
6.2.
Oil the Top of the Spindle
Using the included Brush, put a small
amount of the Oil onto the indentation
in the top of the Spindle. Never use a
cotton swab, as it can leave residue.
Oil top of Spindle
Warning!
The included Bearing Oil can leave stains which are difficult to remove. Carefully follow
these instructions.