J.Sikora – Standard MAX Turntable Manual
14
© 2021 Notable Audio Products | www.notableaudio.com
4.3.
Level the Turntable Chassis
As with the Isolation Base, the
additional weight of the Chassis can
cause some shelves to shift. Use the
Bubble Level to be sure the Chassis is
level. Adjust the height of each Chassis’
Foot as needed.
Level the Chassis if Needed
5.
Oil the Bearing and Spindle
In this step, you will place the main Bearing and apply the J.Sikora Oil to the Bearing and Spindle.
5.1.
Prepare the Oil
Your turntable ships with one jar of
J.Sikora Bearing Oil and a pack of
Brushes and Cleaning Cloths.
With the lid still attached, vigorously
shaker the Oil in the jar for several
minutes. Next, open the lid and use the
supplied brush to stir the Oil until it has
a uniform consistency. It should be fairly
thick, and there should be no lumps at
the bottom of the jar.
Note how the liquid clings to the Brush.
Bearing Oil, Brushes, and Cloths
Make Sure Oil is Well Mixed and Thick
Warning! The included Bearing Oil can leave stains which are difficult to remove. Carefully follow
these instructions.
