J.Sikora – Standard MAX Turntable Manual
26
© 2021 Notable Audio Products | www.notableaudio.com
11.2.
Position Primary Armboard
To mount the Primary Armboard,
position the Connection Pod’s Mounting
Insert over the bolt hole of the Arm
Tower’s Riser.
You will attach your tonearm to the
Armboard in Step 13.
Armboard Placement
11.3.
Bolt Armboard to Riser
While holding the Armboard with one
hand, insert a Bolt through the
Connection Pod and into the Riser.
Place Bolt through Armboard into Riser
Use the largest of the supplied
Wrenches to secure the Bolt so that the
Armboard stays safely attached, but
loose enough to freely rotate.
In Step 15, you will rotate the Armboard
to properly align your tonearm.
Tighten Armboard Bolt