Connection Diagram
What
You’ll Need:
•
1 x J-Tech Digital JTDSP0103
•
4 x Optical Audio SPDIF/Toslink Cables
Setup Instructions:
1. Connect an optical audio cable to the
Digital Audio Output
port of your source device and
to the
“In”
port of the JTDSP0103 (
In the connection diagram above, the Smart TV is the
source device
)
2. Connect an optical audio cable to
Output Port
“A”
on the JTDSP0103 and to the
Digital
Audio Input port
of your audio device
(Wireless Headphones Transmitter/AV
Receiver/Soundbar)
3. Repeat step 2 and utilize
Output Port
“B”& “C”
on the JTDSP0103 for connecting
additional audio devices
*Note
– All connected audio devices must support the same audio
format
(PCM/Dolby Digital/DTS etc.)
that your source device is outputting in order
to achieve simultaneous audio output
J-Tech Digital Support Team
1-888-610-2818
support@jtechdigital.com
