15
Operating Instruction
8.
Command Control
Control software operation:
The serial control software is illustrated with SSCOM32 as an example.
Basic Settings:
Double-click the software in the installation package to run specifically (as shown in
figure 1 below) and install the RS232 software on the computer.
Enter the main interface of the software, as shown in the figure below.
In the parameter configuration area, the serial number of serial port and PC connection
is selected, and the baud rate of the communication protocol is completed: 115200
(default), data location: 8. Stop bit: 1, check bit: no, you can input the instruction in the
command input area and control the machine or remote receiver.
Operating Instruction
