Operating Instructions
SPECIFICATIONS
Operating Temperature Range
-5 to +40
℃
(+23 to +104
℉
)
Operating Humidity Range
5 to 90%RH (No Condensation)
Bandwidth frequency
18Gbps
HDCP
HDCP2.2
Input ports
1xHDMI(female)
Output ports
8xHDMI outputs(female)
Resolution outputs
up to 4Kx2K(3840x2160@60Hz YUV 4:4:4)
Dimensions(LxWxH)
247.2x110x17mm
Power consumption
5W(MAX)
Transmission Distance
15m(Maximum)over standard HDMI cable/26AWG
Net Weight
610g
PANEL DESCRIPTIONS
①
Indicator of HDMI output
②
Firmware port
③
Switch to “Mixed EDID” mode
④
Switch to “Auto EDID” mode
⑤
Switch to “Copy EDID” mode
⑥
Indicator of Power input
⑦
Power on/off: press the up/down to open/close the device
⑧
Power input
⑨
HDMI output ports
⑩
HDMI input port
2
Operating Instructions
EDID Introduction:
Copy EDID:
output 8 is prior port
When
output 8
is connected to one display, other display which connected to other
outputs will follow the Resolution of output 8.
Auto:
Default 4K@60Hz.
Mixed EDID:
always follow the lowest resolution of the displays connected to 8 outputs
in order to support all displays show the source.
The HDCP Version is prior to EDID, when the source is HDCP2.2,
if the TV supports HDCP2.2, it will output 4K@60Hz,
if the TV doesn’t support HDCP2.2, it will output 1080p.
please see below table:
Input source
HDMI display
Support HDCP2.2
HDMI display
Doesn’t support HDCP2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@60Hz
HDCP1.4 1080p@60Hz
HDCP2.2 4K@24Hz
HDCP2.2 4K@24Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
HDCP1.4 4K@24Hz
Support HDR under copy EDID and Mixed EDID mode!
Connecting and operating
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
Connection Diagram
3
