JBL CLUB
12
PROBLEM:
Music lacks dynamics or "punch."
CAUSE and SOLUTION: Speakers are not connected properly. Check speaker connections for proper polarity.
PROBLEM:
Amplifier fuse keeps blowing.
CAUSE and PROBLEM: The wiring is connected incorrectly or there is a short circuit. Review installation precautions and procedures in
manual. Check wiring connections.
PROBLEM:
Engine noise—whining or clicking—in system when the engine is on.
CAUSE and PROBLEM: Amplifier is picking up alternator noise. Turn down gain. Move audio cables away from power wires. Install an alternator
noise filter on power line between battery and alternator. Check ground connections on the amplifier since a loose or improper ground is one
of the main causes for extraneous noise in your audio system.
CHAPTER 5: SPECIFICATIONS
Model
RMS power @
4 ohms
RMS power @
2 ohms
RMS bridged power @
4 ohms
Total peak
power
Frequency response
Maximum
signal input
Maximum
sensitivity
Club-704
70W x 4
100W x 4
200W x 2
1000W
10Hz-40kHz
20V
200mV
Club-4505
45W x 4
65W x 4
130 x 2
1800W
10Hz-40kHz (full range)
20V
200mV
320W x 1
500W x 1
/
10Hz-320Hz (sub)
Club-5501
370W x 1
550 x 1
/
1300W
10Hz-320Hz
20V
200mV
Model
Line in signal-to-noise ratio
(reference to 1 watt)
THD+N at rated power
(20Hz - 20kHz)
Product dimensions
(L x W x H)
Shipping weight
Fuse size
Operating
voltage
Club-704
≥85dB
≤1%
375 x 189.4 x 59mm
14-13/16" x 7-1/2" x 2-3/8"
4.1kg(9.1lbs)
30A x 2
9-16VDC
Club-4505
Full:≥85dB
≤1%
400x189.4x59mm
15-3/4" x 7-1/2" x 2-3/8"
3.3kg(lbs)
30A x 3
9-16VDC
Sub:≥80dB
Club-5501
≥80dB
≤1%
243.5 x 189.4 x 59mm
9-5/8" x 7-1/2" x 2-3/8"
4.7kg(10.4lbs)
30A x 2
9-16VDC
