The Attitude Solo is configurable via the onboard 2.8" touchscreen LCD display.
The blue title bar indicates the name of the current menu, and the list of white
items below indicate menu items. Each item can be tapped, which either
opens a sub-menu or pop-up. When inside a sub-menu, a white left arrow will
appear in the blue title bar, which can be tapped to exit the menu. Gray menu
items indicate disabled items which cannot be tapped.
Each menu item has a name on the left side of the screen and a value on the
right side of the screen. A menu item without a value indicates that tapping
that item will open a sub-menu. Tapping on a menu item with a value will
open a pop-up to edit that menu item's value. When inside a pop-up, a
Save
button will appear to save and exit. Pop-up menus include blue arrows or
icons which can be pressed to manipulate the value inside the pop-up.
While on the main menu screen, after no activity has been detected for 30
seconds, the screen will go to sleep. The screen will appear black and a small
colored bar on the left side of the screen indicates that the device is still
powered on. To exit sleep mode, simply tap anywhere on the screen.
User Manual
Attitude Solo (2nd Generation)
jsquaredsystems.com
The DMX output pins are
GND
(DMX ground connection),
A+
(DMX positive
signal), and
B-
(DMX negative signal).
The Trigger input pins are
IN
(input) and
GND
(ground). To activate the trigger,
briefly close the connection between these two pins via a button or
momentary relay.
Display
