J2D EA2147A, Instruction Manual

12

AFTER SALES SUPPORT

  AUS  1300 777 137        NZ  0800 824 556     EMAIL  service@unclebills.com.au

8.  Lower the Stylus onto the vinyl record using the Cue Lever. 

9.  Turn the Power/Volume Dial clockwise to increase the volume , or turn the Power/Volume Dial 

anticlockwise to decrease the volume. 

10.  To stop playing, lift the Tone Arm using the Cue Lever or your hand and place it back into the Tone 

Arm rest. Secure the Tone Arm once more by engaging the Tone Arm Lock. Cover the Stylus with 

the protective cover if needed. 

Playing a USB Drive/Micro SD Card

You can play digital music from a USB drive or Micro SD card using the Turntable Briefcase.

1.  Turn the Power/Volume Dial clockwise until you hear a ‘click’ sound. The LED Display Screen 

will show the welcome message HI briefly, then show -PHO indicating that the Turntable mode is 

active. This is the default setting for the Turntable Briefcase.

NOTE: The Tone Arm must be in the Tone Arm rest or the Turntable Briefcase will automatically 

select the Turntable playback mode. Ensure that the Auto Stop Switch is in the ON Position.

IMPORTANT: Before playing music/media from a USB drive or Micro SD card, turn down the volume 

of the Turntable Briefcase to avoid a possible loud output from the speakers. Wait until the music/

media is playing and then turn up the volume.

IMPORTANT: Before inserting a USB drive or Micro SD card into the unit, ensure that the Turntable 

Platter is not spinning. While the Turntable Platter is spinning no other playback modes can be selected.

2.  Insert a USB drive or Micro SD Card into USB input or Micro SD input. The LED Display Screen will 

briefly show the -LOD message while the music loads.

NOTE: When inserting a Micro SD card into the Micro SD input, the top of the Micro SD card should 

be facing away from the LED Display Screen. The Micro SD card can only be inserted in the correct 

direction. Never force the Micro SD card into the Micro SD input.

3.  Any music loaded on the storage device will then begin to play automatically.

4.  Use the Playback Controls to pause or skip forwards and backwards through the stored tracks. 

The Playback Controls can be seen on page 11 of the manual. 

5.  Once you have finished playback from a USB drive or Micro SD card press the M button to scroll 

through the other available playback modes.

NOTE: Ensure that before the USB drive or Micro SD card is removed from the LED Control Panel 

that playback has been paused by pressing the Play/Pause button once.

Instructions (cont.)