USB 3.0 MULTI-ADAPTER
Datasheet
2
INTRODUCTION
The j5create USB 3.0 Multi-Adapter series provides extra connectivity from your
computer with 5Gb/S faster transfer speed. These pocket-sized Multi- adapters allow
you to add additional USB computer peripherals and VGA/HDMI Monitor through you
USB port.
With j5create multi-adapters, there is no need to open up your computer to add an
expensive graphics card, you simply load the drivers, plug in the adapter to the USB
port, then plug in the VGA/HDMI monitor cable into the adapter and you are ready. It
supports three viewing modes: primary, extended, mirror modes. With “plug & play”
functionality between your computer and 2nd monitor or projector, you will be able
to create a new visual environment in seconds.
j5create’s elegant multi-adapter series provides you with a fast and portable
alternative solution.
SERIES COMPARISON:
Function Port
JUH410
JUH450
USB 3.0 Port
3
3
Display
VGA
HDMI
SYSTEM REQUIREMENT:
Microsoft Windows 8.1 / 8/ 7/ XP (32-bit or 64-bit)
Mac OS X 10.9 / 10.8 / 10.7 / 10.6
CPU: Intel 2 core Quad 2.33 GHz
RAM: 2 GB DDR2
Available USB port (USB 3.0 is recommended)
Note for Video Player:
*Windows XP users: “Windows Media Player” is recommended for video playback
*Windows XP users & MAC users: Some Windows XP & MAC products are not
supported by USB 3.0 at this time, therefore we suggest USB 2.0 for ‘office applications’
only; Video Playback is not recommend due to USB 2.0 bandwidth limitations causing
limited video performance.
Summary of Contents for JUH450
Page 7: ......
