Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 236 of 298
9
Propeller Service Manual
9.1
Certified Propeller Models (J160-C)
C000242 series propellers with a serial number of 2900 or higher and 4A401 series propellers with a
serial number of 002 must be maintained in accordance with Propeller Technical Manual JPM3L01.
The information given below is not applicable to these propellers.
Operators with earlier propellers may also use manual
JPM3L01
for reference, but must be aware
that there may be differences between the propellers detailed in the manual and their own.
Operators using the composite scimitar propellers (4A482U0D or 4A484E0D) must maintain their
propeller in accordance with the propeller technical manual
JPM0001
.
9.2
Approved Installations (all J-Series)
The following combinations (Table 9-1, Table 9-2, Table 9-3) are approved.
Table 9-1
– Approved Propeller Installations
Airframe
Engine
Propeller
Dia x Pitch
Remarks/Limits
Jabiru J160-C
Jabiru 2200C
C000242
or
4A401 Series.
1524 x 1067
(60” x 42”)
Not above 3300 RPM
Jabiru J160-D,
J170-C, J170-D
Jabiru 2200
C000242
or
4A401 Series.
1524 x 1067
(60” x 42”)
Not above 3300 RPM
Sensenich 2-
bladed Fixed
pitch wooden.
1524 x 1092
(60” x 43”)
or
1524 x 1168
(60” x 46”)
Not above 3300 RPM
Other Jabiru J160
& J170 Variants.
J120-C
Jabiru 2200
C000242
Series
1524 x 1117
(60” x 44”)
or
1524 x 1067
(60” x 42”)
Not above 3300 RPM
J200, J230, J250 &
Variants, including
J230-C, J230-D
Jabiru 3300
C000262
Series
1524 x 1346
(60” x 53”)
or
1524 x 1397
(60” x 55”)
Not above 3300 RPM
Sensenich 2-
bladed Fixed
pitch wooden.
1524 x 1346
(60” x 53”)
or
1524 x 1397
(60” x 55”)
or
1524 x 1422
(60” x 56”)
Not above 3300 RPM
