Aircraft Technical Manual
Jabiru Aircraft
Pty Ltd
J120, J160, J170, J200/J400, J230/J430, J250/J450 Variants
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated: 29th October 2014
Issued By: AS
Page: 287 of 298
21.1.2 Engine and Engine Compartment (see worksheet in JEM0002)
21.1.3 Fuel System (refer to section 8)
CARRIED OUT BY (print name)....................................(signature)................................(date)............
Fuel filters, drain valves, carburettor bowl
– Check values for leakage, check and replace fuel filters
at required intervals, remove and inspect carburettor bowl for contaminants.
Fuel tank vent, cap & Placards
– Check function, check placard placement
Fuel tanks
– Inspect for signs of leakage or damage on tanks and wing root fittings and lines
Tank attachments
– Check correct fitting
Fuel shut-off valve & placards
– Check correct function and ensure placards are in place
Electronic boost pump
– Check correct function and sufficient flow rate
Fuel lines and connectors
– Check for signs of deterioration, obstruction, foreign matter etc
Fire sleeves
– Check condition and length of fire sleeves
Fuel line sheath inside cabin
– Check sheaths are secure, check for rips, tear, leakage etc.
Fuel flow Rate
– Check as detailed in JEM0002
P
F
Comments:
50
hourly
P
F
Comments:
100
hourly
P
F
Comments:
100
hourly
P
F
Comments:
100
hourly
P
F
Comments:
100
hourly
P
F
Comments:
50
hourly
P
F
Comments:
50
hourly
P
F
Comments:
50
hourly
P
F
Comments:
100
hourly
P
F
Comments:
Annual
