Jabiru Aircraft
Pilot Operating Handbook
Model J170-D
JP-FM-13
Revision:
0
1
2
3
4
28 Feb 2020
Page 4-37
Propeller & Spinner ................................. CHECK for nicks & security
Cowl ........................................................ CHECK Security, rubbing on engine.
Engine Oil ................................................ CHECK using oil filler door.
Nose Wheel ............................................. CHECK condition & pressure.
10.
“Pulling Through” The Engine
Before the first flight of the
day the engine must be “pulled through” by hand. This is the process
of turning the engine over by turning the propeller by hand. The compression of each cylinder in
turn will be felt a resistance as the propeller is turned. The engine should be rotated for a count of
at least 8 compressions.
Master Switch ............................................OFF
Ignitions .....................................................OFF
Throttle ......................................................Closed
Propeller ....................................................TURN by hand & observe engine for odd
noises or heavy movements. Check for
regular compression.
CAUTION:
Prior to pulling through the propeller by hand, the engine must be cold, both ignition circuits & the
Master Switch must be switched OFF, the brakes applied & throttle closed.
WARNING
A hot engine may fire with the ignition/s switched OFF.
DO NOT pull through a hot engine.
CAUTION
Several causes of irregular compression
– such as poorly sealing valves – can lead to extensive
engine damage if not addressed. The Jabiru 2200 Engine Instruction & Maintenance Manual
provides additional details.
11. Left Wing
Wing Tie-Down ........................................ DISCONNECT
Wing Strut Mount Bolts ............................ CHECK Security**
Wing Root Mount Bolts ............................ CHECK Security***
12. Left Wing
– Trailing Edge
Aileron ..................................................... CHECK Security & Full & Free Movement
Flap ......................................................... CHECK Security
Control rods & cables .............................. CHECK Security. Check rod ends for
freedom of rotation & excess movement.
