3) Controlling from a different phone
The car alarm can also be controlled with SMS command messages from an unauthorized phone. In such
a case you have to add a
user code
(password) in the command SMS before the command. The text
should be as follows:
PASSWORD space COMMAND
. The default user code (PASSWORD) is USER.
You can change the password using a command from the table above or ask the installer to do it for you.
An example of setting a car alarm with an SMS message from an unauthorized phone is:
USER AM
An example of requesting an SMS with help is:
USER HELP
D
Other services
The car alarm can also be used for securing a garage, cargo space, a caravan, etc.
Wireless detectors:
Up to 8 wireless detectors can be enrolled to the car alarm. Depending on their type,
they react to the breaking of windows, motion or smoke. The detectors guard the
inside of the car, possibly even its outside up to a distance of approx. 20 meters.
After setting the car alarm, an exit delay of 20 seconds is provided to all enrolled
detectors (e.g. for leaving the garage). If a detector is triggered while the car alarm
is set (and within reach of the detector), the alarm is triggered either immediately
or after 20 seconds of the entrance delay (depending on the detector settings).
Detectors can be enrolled as internal or external ones.
• Internal detectors are not active when the car alarm is partially set, e.g. when you leave a dog in the car.
• External detectors are always enabled when the system is set.
The detectors (sensors) are powered by batteries with a lifetime exceeding 1 year. When the batteries are low,
the system sends an SMS message. Should you need more information, contact the installer or the manufacturer.
2
6
T2711 - Jablotron - Manua
́
l Atho6 6
T2711 - Jablotron - Manua
́
l Atho6 6
8.4.2009 13:27:12
8.4.2009 13:27:12
