JA-120PW Bus combined PIR and MW motion detector
JA-120PW Bus dual PIR and MW motion detector
2 / 2
MML51104
Open space
Model room
Fig 3: Detection coverage characteristics in open space and in
a model room – installation in a corner.
Disconnect the jumper completely after testing the
coverage of the PIR/MW parts of the detector.
Technical specifications
Power
from the control panel bus 12 V (9 ... 15 V)
Current consumption in standby mode
5 mA
Current consumption for cable choice
25 mA
Recommended installation height
2.5 m above the floor
Detection angle / PIR coverage
110 degrees/12 m (standard lens)
Detection angle / MW coverage
24 degrees/15 m (in open space)
Detection angle / MW coverage
90 degrees/15 m
(see the model room)
MW Frequency
9.35 GHz
Dimensions
95 x 60 x 55 mm
Weight
110 g
Classification
Security grade 2 / Environmental class II
- according to
EN 50131-1, EN 50131-2-4
- environment
Indoor general
- operating temperature range
-10 to +40 °C
- average humidity
75 % RH, non-condensing
- certification body
Trezor Test s.r.o. (no. 3025)
Also complies with
ETSI EN 300 440-1, EN 60950-1,
EN 50130-4, EN 55022
Can be operated according to
ERC REC 70-03
Operation requires notification national telecommunication offices
of Finland, France, Italy, Serbia and Montenegro, Spain, Sweden,
UK
JABLOTRON ALARMS a.s. hereby declares that the JA-120PW
is in a compliance with the relevant Union harmonisation
legislation: Directives No: 2014/53/EU, 2014/35/EU, 2014/30/EU,
2011/65/EU. The original of the conformity assessment can be
found at www.jablotron.com - Section Downloads.
Note:
Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the manufacturer after use.
