JA-16J One-way four-button keyfob
JA-16J One-way four button keyfob
2 / 2
MMJ21101
LED indication table
Action
Indication
Activation (pressing)
the button
0.5 s flash of red LED
1x short acoustic signal
Send enrollment signal
1 s flash of red LED
Deactivation (turn off) keyfob
lock or deactivation of acoustic
indication
0.5 s flash of red LED
1x short acoustic signal
Activation (turn on) keyfob lock
or activation of acoustic
indication
2x 0.5 s flash of red LED
2x short acoustic signals
Low battery
Short flash of red LED
3x short acoustic signals
Table: 2. Remote control indication
Battery replacement
Low battery indication is signalled on the remote control after any
button is pressed. The action assigned to the button is done and
the red LED flashes along with 3 quick beeps. Low battery
information is also sent to the control panel. The remote still works
as usual but the RF range goes slowly down. Low battery indication
is cancelled when a new battery is inserted.
To change the battery, unscrew the 2 screws from the back
plastic; remove the cover with the metal strut from the housing.
Then press any button a few times to discharge the rest of the
energy from the capacitors and insert a new battery.
Changing the batteries DOES NOT RESET settings of the
keyfob lock or acoustic indication.
Don´t throw the used battery into the trash but take it to
a suitable recycling station.
Technical specifications
Power - lithium battery
type CR 2032 (3.0 V/0.2 Ah)
(Power supply C class according to EN 50131-6)
Current consumption:
- Nominal consumption
1,1 μA
- Maximal consumption
33 mA
Low battery voltage detection
≤
2.2 V
Typical battery lifetime
approx. 5 years (10 activations/day)
Communication band
868.1 MHz, JA-10 protocol
RF range
approx 100 m (line of sight)
Dimensions
77 x 36 x 15 mm
Weight with no battery
35 g
Classification
Security grade 2/environmental class II
- Complies with
EN 50131-1, EN 50131-3 (digital key)
EN 50131-5-3, EN 50131-6
- number of unique production codes
>1 Million
- environment
indoor general
- operational temperature range
-10 °C to +40 °C
- average humidity
75 % RH, no condensation
- certification body
Trezor Test s.r.o. (no. 3025)
Also complies with
ETSI EN 300 220-2, EN 50130-4,
EN 55032, EN 50581, EN 62368-1
Can be operated according to
ERC REC 70-03
JABLOTRON ALARMS a.s. hereby declares that the JA-16J
is in a compliance with the relevant Union harmonisation
legislation: Directives No: 2014/53/EU, 2014/35/EU,
2014/30/EU, 2011/65/EU. The original of the conformity
assessment can be found at www.jablotron.com - Technical
Support section.
Note:
Although this product does not contain any harmful
materials we suggest you return the product to the dealer or
directly to the producer after use. For more detailed
information visit
