Oasis configuration table
No.
Oasis control panel configuration
1.
An unsplit system (only ABC)
2.
A system with partial setting (arming) (A or AB or ABC)
3.
A split system (A or B or ABC)
4.
Setting (arming) without an access code enabled
5.
Access by code and card (both card and code have to be presented)
6.
Exit delay beeps
7.
Exit delay beeps while partially setting (arming)
8.
Entrance delay beeps
9.
Permanent alarm status display for a set system
10.
Triggered detector indication
11.
Auto-bypass of triggered detectors
12.
Final-door (exit/entrance delay extended)
13.
Device X:
14.
Device Y:
15.
Unsetting (disarming) by service code enabled
20.
sec Exit delay time
21.
sec Entrance delay time for a “main-door” access
22.
sec Entrance delay time for a “final-door” access
A.
Automatic summer time
B.
Programming phone numbers in maintenance mode enabled
C.
The type of the communicator installed in the system
Notes:
•
The table should be filled in by a service technician according to the system configuration
•
Ticking (checking) the field in the second column indicates that the corresponding function is
enabled
ABC
A
B
C
A
B
C
1.
Unsplit system
Only allows you to set the
entire system
2.
Partial setting (arming)
Setting (arming) A or AB or the
entire system
3.
Split system
Setting A or B. Section C is
automatically set if A+B
are set.
Oasis user manual
18
MKE22102