Actions' table
a no splitting
split
0
no action
no action
1
arm all
arm all
2
disarm
disarm all
3 partial arming
arm A
4 partial arming
arm B
5
disarm
disarm A
6
disarm
disarm B
4.4 Automatic arming / disarming
The system can automatically arm and disarm for a requested period of a day.
While in the user more, up to ten instructions (time & action) can be programmed
in the period of one day.
To switch the control panel to the user mode enter
F 0 master code
. User
mode will be indicated by a
U
on the keypad. To program automatic arming enter:
64 n a hh mm
where:
n
= instruction number from 0 to 9
a
= action (see the actions' table)
hh
= hours (from 00 to 23)
mm
= minutes (from 00 to 59)
Example:
to program an automatic complete
arming of the system at 21:15 everyday
enter:
64 0 1 21 15
Notes:
•
If any automatic action is selected, it will be preformed everyday at the
programmed time, following the internal control panel clock.
•
The automatic arming and disarming can be overridden manually anytime
(by a user code or a remote control)
•
If the control panel is in the requested arming mode before the action
time, the programmed action will not change the arming
•
Factory default setting - all instructions are set for no action
To
exit user mode,
press the
N key
.
4.5 Bypass
The supervisor can bypass (switch off) particular zones (potential sources of
alarms) while in the user mode. If a zone is bypassed, it can’t trigger an alarm.
To switch the control panel to the user mode enter
F 0 master code
. User
mode will be indicated by a
U
on the keypad.
To set up bypass:
1. Press key
1
to open the bypass menu.
2. With key
1
and
7
you can scroll all potential alarm sources (wireless
detectors are distinguished with the symbol ).
3. Select the source (detector, wired input…) which you want to bypass and:
a. either press key
2
for 2 seconds to bypass the source for the next
arming period (confirmed by flashing Battery LED);
b. or press key
3
for 2 seconds to bypass the source permanently
(confirmed by the Battery LED being permanently lit);
Alarm system JA-63 „Profi“
- 10 -
MGK51504
Summary of Contents for Profi
Page 1: ...JA 63 Profi User manual...
