Jabra 14201-32 Manual Download

Page: 1 / 4

Jabra Link 14201-32

How to connect my Jabra GN9120 EHS / GN9125 EHS with

Nortel IP 1120E, 1140E, 1150E, 1165E

Prerequisite:

Jabra GN9120 EHS + Jabra LINK 14201-32 (from FW 2.2.0)

Jabra GN9125 EHS + Jabra LINK 14201-32 (from FW 2.2.0)

In combination with one of the following phones:

Nortel IP 1120E

Nortel IP 1140E

Nortel IP 1150E

There is a minimum revision level (UNIStim 5.2) needed when using our

EHS adapter on Nortel 1140e with CS2100 server. The CS1000 is OK with

3.1 or greater. It can be downloaded from http://support.nortel.com.

Connection:

1. Connect the 1-sided end (USB plug) of the EHS adapter with the USB

socket on your phone.

2. Insert the RJ9 plug into the socket identified with the "phone" symbol

and the RJ45 plug into the socket identified with "AUX" on the base.

EHS setup:

The Jabra GN912x must support and be set up on DHSG EHS.

1. Place the headset on the base and press the PLUS and MINUS buttons

simultaneously for approx. 6 seconds until the online display on the

12/01/2022 22:29

https://www.jabra.co.nz/supportpages/jabra-link-14201-32/14201-32/faq/50e3d2d4-4986-
4d9b-b283-11c16b2ceb5f

Page 1 of 4

Summary of Contents for 14201-32

Page 1: ...It can be downloaded from http support nortel com Connection 1 Connect the 1 sided end USB plug of the EHS adapter with the USB socket on your phone 2 Insert the RJ9 plug into the socket identified wi...

Page 2: ...3 With the PLUS or MINUS buttons you can now switch between the different EHS types 4 To confirm the EHS has successfully installed the base automatically switches back to charge mode after approx 10...

Page 3: ...the telephone Services Telephone Options On Hook Default Audio Path Headset Enabled When phone is idle customer must press Services button twice quickly Then there will be one of two options If they s...

Page 4: ...12 01 2022 22 29 https www jabra co nz supportpages jabra link 14201 32 14201 32 faq 50e3d2d4 4986 4d9b b283 11c16b2ceb5f Page 4 of 4...