Jabra BT5020 - ANNEXE 641, User Manual

GB

CN

CN

JP

KR

TH

MA

Jabra BT 5020 Bluetooth headset

GB

CN

CN

JP

KR

TH

MA

Redial last number*

•  Double Tap the answer/end button when the headset is on and not used. 

Adjust sound and volume 

•  Press the volume up or down to adjust the volume. 

Mute an ongoing call 

•  To mute an ongoing call, press both volume up and down at the same time

  low beep alert plays during a muted call.

•  To un-mute tap either of the volume buttons

Call waiting and placing a call on hold* 

This lets you put a call on hold during a conversation and answer a waiting call.

• 

Press

 the answer/end button once to put the active call on hold and 

  answer the waiting call.

• 

Press

 the answer/end button to switch between the two calls.

• 

Tap

 the answer/end button to end the active conversation.

* Functions marked with * are dependent on your phone supporting these 

features. Check your phone’s user manual for further information.

7. Battery Indicator

When the Jabra BT5020 is turned on or a button is pressed more than 1 minute 

after last button press, the LED indicator the battery level of the headset.

2 Green flashes  

= 20% - 100% Charged

2 Yellow flashes 

= 10% - 20% charged

2 Red flashes  

= Less than 10% charged

8. What the lights mean

What you see 

What is the mean about your headset

2 coloured flashes 

See Battery indicator (section 7)

Flashing blue and green light  Incoming call

Flashing blue light 

Flashing every second: active call

Flashing blue light 

Flashing every three seconds: in standby  

mode (only for 1 minute then off)

Flashing red light 

Running low on battery

Solid green light 

Fully charged

Solid red light 

Charging

Solid blue light 

In pairing mode – see section 4

9. Using the Jabra BT 5020 with 2 mobile  

phones

Jabra BT5020 is capable of having two mobile phones connected to the 

headset at the same time. This will give you the freedom of having only 

headset to operate both your mobile phones and the operation of the 

functions in the headset functions as described in section 6.

Only it must observed that Last Number Redial will dial the number from the 

last outgoing call, independent of the mobile phones, and the Voice Dialling 

function only will work on the last paired mobile phone. 

10. Using a Jabra Bluetooth Hub

The Jabra BT5020 can used along with the Jabra Bluetooth Hub (sold 

separately). This will enable you to use the headset with both your mobile 

phone and your office phone. 

To pair the Jabra BT020 with the Jabra Bluetooth Hub

The pairing process is a little different:

•  Put your Jabra BT5020 in pairing mode

•  Put the Jabra Bluetooth Hub in pairing mode.

•  Place them close together. You do not need a dedicated pin code to pair

  the two Jabra products. Consult the Jabra Bluetooth Hub user manual for

  more information on how to connect the Bluetooth hub to your office

  phone.

The use of the Jabra BT5020 with the Jabra Bluetooth Hub is very similar to 

using the headset with a mobile phone only. The only difference lies in the 

transfer of a call to the headset from the office phone. 

Transfer the call to the headset

•  Tap the answer/end button to transfer the call from the office phone to the

  headset via the Jabra Bluetooth Hub

The answering of a call from the office phone requires a hook lifter in order to 

have the Jabra BT5020 answer the call automatically.

11. Using a Jabra Bluetooth adapter

If you want to use the Jabra BT5020 with a non-Bluetooth mobile phone, the 

Jabra A210 adapter is the answer.

It gives you a cordless connection with the following headset feature: answer/

end call, voice dial function (if supported by the phone) and mute. Rejecting 

a call, last number redial and putting a call on hold might not be supported 

through the headset jack in the mobile phone.