GN 9050 Beta User Manual
9
Setting Up
1.
Connect all Cords.
Unplug the handset cord from the base of the telephone. Plug the Interface cord
into the vacated handset cord port on the telephone. The location of this port is
different for each phone and is often on the underside of the phone. Some
telephones must be programmed for headset use.
2.
Attach the Base Stand.
Carefully insert the three plastic clips into the vacant base station holes.
3.
Attach the battery to the remote:
Press the two buttons located on the side of the battery while carefully inserting
the plastic tabs into the remote. You should hear it click into place.
